{"labelingInfo":null,"renderer":{"description":"Survey Data Locations","label":"Semi-Monthly Bus Inspection","symbol":{"angle":0,"color":[255,0,0,255],"outline":{"color":[255,255,0,255],"width":1},"size":8,"style":"esriSMSCircle","type":"esriSMS","xoffset":0,"yoffset":0},"type":"simple"},"transparency":0}
HasZ: false
HasM: false
Has Attachments: false
Has Geometry Properties: false
HTML Popup Type: esriServerHTMLPopupTypeAsHTMLText
air_tanks (type: esriFieldTypeString, alias: Open Air Tanks. PP-1 Valve Must Engage at 40 PSI (+/- 2 PSI)Do not test by pumping the brakes to drop the air pressure. First drain either the primary or secondary air tanks to 30 psi or less. Then drain the other tank. When the dash gauge drops to 40 psi in the second tank being drained the PP-1 should pop up., SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [1: Fail])
service_brakes (type: esriFieldTypeString, alias: With Air Pressure at a Minimum of 100 PSI & Service Brakes Applied, Air Pressure Must Not Drop > 3 PSI in One Minute, SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [1: Fail])
parking_brakes (type: esriFieldTypeString, alias: With Air Pressure at a Minimum of 100 PSI & Parking Brakes Released, Air Pressure Must Not Drop > 2 PSI in One Minute, SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [1: Fail])
press_build (type: esriFieldTypeString, alias: Run Engine On Fast Idle & Pump Down Brakes to 80 PSI. Observe Pressure Gauge & Note Time to Build Pressure From 85 PSI to 100 PSI. Time Should Not Exceed 45 Seconds, SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [4: Fail])
compressor (type: esriFieldTypeString, alias: Start Engine with Fast Idle On.The compressor should cut out at 120 psi. Continue to run engine on fast idle & pump down brakes to below 90 psi. Compressor should cut back in & begin to build air pressure., SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [4: Fail])
torque (type: esriFieldTypeString, alias: Test Torque of 4 Lug Nuts Per Wheel to 480 ft/lbs(fails if any are loose), SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [1: Fail])
hbeam (type: esriFieldTypeString, alias: Visually Inspect Over the Top of the H-Beam Behind Axle Housing with a Light, SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [3: Fail])
tie_rod (type: esriFieldTypeString, alias: Check Tie Rod & Drag Link Spindles for Excessive Play (No up/down movement allowed), SQL Type: sqlTypeOther, length: 255, nullable: true, editable: true, Coded Values: [0: Pass], [1: Fail])